
Pressure Cleaning · Sydney
Grime Out.Kerb Appeal In.
Commercial-grade pressure washing for driveways, decks, roofs, and façades. Same-day results, no damage, no mess left behind.
Pressure cleaning matched to the surface and the home it sits at.
Not every surface wants the same pressure. Too much strips sandstone and etches concrete; too little leaves the grime it was meant to shift. We read the surface first, then match the pressure and detergent to it.
The right combination lifts the dirt, protects the finish underneath, and holds up well past the next storm season, instead of looking clean for a fortnight.
A sandstone path, a tessellated verandah, a strata driveway, or a new concrete drive, each wash is set to the surface it's cleaning.

Every Surface. Every Time.
From driveways to rooftops - we match pressure, temperature, and detergent to the surface.

Driveways & Paths
Concrete, pavers, exposed aggregate. Removes oil stains, moss, mould, and traffic grime. No surface damage.

Decks & Patios
Timber, composite, and concrete decks. Low-pressure soft wash protects the surface while lifting dirt and algae.

Roof Cleaning
Terracotta, Colorbond, and concrete tiles. Soft wash + biocide treatment eliminates lichen and black algae without lifting tiles.

House Washing
External walls, eaves, fascia, and gutters. Removes cobwebs, mould, pollution film, and bird mess. Soft wash only.

Pool Surrounds
Sandstone, travertine, and concrete pool decks. Removes algae, calcium build-up, and sun cream residue safely.

Fences & Retaining Walls
Timber, Colorbond, brick, and block work. Clean before painting or staining, or just to restore appearance.

Years of grime, gone in a day.
Everything under one roof.
Site assessment
Substrate, drains, plants noted
Pre-treatment
Spot treatment for stains
Pressure wash
Matched pressure for surface
Detergent rinse
Neutralise, full clean rinse
Final inspection
Walk-through, retreat as needed
The Difference You See.
Right Pressure for Every Surface
We use variable pressure from 200–3500 PSI. Soft wash for roofs and render. High-impact for concrete and brick. Never one setting for everything.
Eco-Safe Detergents
Biodegradable, plant-based detergents that break down grime chemically - meaning lower pressure, less abrasion, better results.
Hot Water Units
Hot water cuts grease, oil, and mould biofilm far more effectively than cold. Most operators don't carry hot water units. We do.
Fully Insured
Full public liability insurance. If something goes wrong, you're covered. Don't let uninsured operators work on your property.
Consistent Quality
The person who quotes is the person who cleans. One point of contact and consistent quality, every time.
Quality Standard
We use commercial-grade equipment and eco-friendly detergents to deliver professional results on every job.
From quote
to handover.
Five steps, every one explained before tools touch site.
- Step 01· Half day
Free Consultation
We visit, measure, and listen to how you want the space to work. No cost, no obligation.
You get: Scope summary + ballpark range - Step 02· 3–5 days
Fixed Quote
Detailed written quote. What we quote is what you pay.
You get: Written quote - Step 03· 1–2 weeks
Design & Selection
Choose finishes from curated material boards. We guide you through every selection.
You get: Locked finishes schedule - Step 04· 10–15 days
Build Phase
Our licensed team carries out the work. Site managed throughout, with progress photos shared at each stage.
You get: Progress photos at each stage - Step 05· ~Half day
Handover
Walk-through, defect sign-off, warranty docs handed over, full site clean.
You get: Warranty pack + final clean
Common Questions
Not with us. We assess the surface first and set pressure accordingly. Pavers and tiles are cleaned at lower pressure with detergent pre-treatment, which does the heavy lifting so the water doesn't have to.
No. As long as we have access to the areas to be cleaned, you don't need to be present. We'll send you a completion message with photos when we're done.
Yes. We carry extension lances and, for roof work, we use soft wash systems that apply from ground level. No high ladders on your gutters.
Pressure cleaning combined with our degreaser removes most oil stains. Deep, long-standing petroleum stains may lighten significantly but not fully disappear - we'll tell you honestly what to expect before we start.
Driveways and paths annually. Decks every 1–2 years before re-oiling. Roofs every 2–3 years or when lichen is visible. House exteriors every 2 years. We can set up a recurring maintenance schedule.
We carry a water tank for most jobs so we're not reliant on your tap. For larger jobs we may connect to your outdoor tap - we'll confirm this when quoting.